Planar 2D-12, Руководство по установке

Страница: 3 / 36

3
Technical Description
Introduction .
These Instructions are designed for organizations and
users engaged in the installation of PLANAR air heaters. The
document describes basic rules of installation of products in
heated areas, as well as performance testing of the product
after installation. These instructions are used in conjunction
with the Operation Manual.
If a fault occurs due to non-compliance with
the
installation instructions and the
information they contain, the manufacturer
bears no responsibility therefore. The same
applies to the repair specialist who does not
have the necessary qualifications, or uses
non-original parts without obtaining the
permission of the manufacturer.
These installation instructions contain the necessary
information and advice on the installation of air heaters
PLANAR.
1 Application / modification .
Application of air heaters.
Air heaters are designed to heat the driver's cabin or
various other interior spaces of limited volume in vehicles
at ambient temperatures up to minus 45°C.
Modification
Heaters run on diesel fuel.
Voltage designations in heater labeling:

«12» designed to operate with power supply voltage of 12V;

«24» designed to operate with power supply voltage of 24V.
Air heaters are available in different configurations and have
the following designations:
PLANAR-2D-12-P-xxxx, PLANAR-2D-24-P-xxxx;
PLANAR-4DM2-12-Р-xxxх, PLANAR-4DM2-24-P-xxxх;
PLANAR-44D-12-GP-Р-xxxх, PLANAR-44D-24-GP-P-xxxх;
PLANAR-8DM-12-Р-xxxх, PLANAR-8DM-24-P-xxxх;
PLANAR-8DM – product designation;
12 or 24 – supply voltage;
P – modification of the heater (modification of control unit);
xxxх – digital designation of the configuration.