Plaid Systems Spruce Controller Gen 2, Инструкция по эксплуатации

Страница: 19 / 20

19
LED Codes
Breathing Light Blue : Normal status. Spruce is connected to the Wi-
Fi network, and idle.
Breathing Light Blue with Red Flashes : Controller is disconnected
from a WiFi network, but credentials are stored and will reconnect
when WiFi is available
Flashing Blue : Spruce is listening for Wi-Fi credentials.
Flashing Red : Controller is looking for devices to join its Zigbee
network. When a device is found, the logo will turn blue before going
back to the normal status
Breathing Green : Spruce is running a schedule.
Solid Green : A zone is on from a manual toggle; a schedule is not
running.
Breathing Purple : Listening for Wi-Fi credentials (flashing blue) has
timed out. Unplug and re-plug in the controller to reset this state.
Flashing Purple : The sensor network is being created. This should
only happen the first time a sensor is joined and should last for about
10 seconds.
Flashing Yellow : An invalid state. Unplug and re-plug in the
controller to reset the controller.