Manual
Version
Page
DB04A
EN A1-9
PKP Prozessmesstechnik
32
4.12.1.4. Display auto off
The display can be set to switch off after a defined time following your last
touch event. If you set the “Display auto off” to “Disabled”, the display stays
on till the power is switched off. When the display is switched off, the
backlight will also switch off. The totalizer is still working.
You can activate the display again by touching it.
4.12.1.5. Light auto off
In this menu you can define a time before the backlight automatically
switches off (after the last touch event). The backlight goes on again when
you touch the display. When the setting is “Disabled” the light is
continuously on.
When the backlight is switched off you can still read the display. The
backlight only works if there is an external power connected. On battery
power supply the backlight is not operational.
4.12.2. Units
In the
Units
menu you can set the required engineering units for the totalizer and the flow indication.
If there is a unit selected with too many digits, the device will show: “Out of range” on the display.
If you select a totalizer unit that would create too many digits the totalizer will show 9999999.
