~
92
~
2.2 Installation of the hob
2.2.1 Pre-installation requirements
➢
The worktop must be made of heat-resisting material. Structural elements should
not interfere with the installation area.
➢
The installation must meet the safety requirements as well as the legal rules and
regulations.
➢
The wall sat the hob should be covered with heat-resistant material, e.g. ceramic
tiles.
2.2.2 Selection of installation equipment / Dimensions
DANGER!
The appliance must be installed
by a qualified
professional only
. Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
S
AFETY INSTRUCTIONS REGARDING THE INSTALLATION
When installing the appliance ensure optimal heat radiation to maintain the
operating safety.
The wall and the reach of the heat radiation above the worktop must be made of
heat-resistant materials.
To avoid any damage, the sandwich layer and adhesive must resist heat.
Provide an installation opening relevant to the dimensions on the following
drawings. For installation and use, a minimum of
50 mm
space shall be preserved
around the hole; s. fig. below: D
IMENSIONS OF THE HOB
/
G
ENERAL
DIMENSIONS
.
Choose heat-resistant materials for the work top only to avoid any deformation
caused by the heat-radiation of the appliance.
Содержание BIC8 2KB-DPY
Страница 22: ... 22 ABB 1 ABB 2 ...