Pkm BIC8 2KB-DPY, Инструкция по эксплуатации

Страница: 129 / 152

~
129
~
T
HE DOOR LOCKING IS DEACTIVATED AUTOMATICALLY UNDER THE
FOLLOWING CONDITIONS
:
➢
when the self-cleaning process is paused or finished and the temperature inside
the appliance is less than 280
0
C .
➢
as soon as the temperature inside the oven is less than 280 0 C .
NOTICE! If the appliance is disconnected from the mains during the self-
cleaning process, the door looking remains activated. You have to connect
the appliance to the mains again so the automatic door locking can be
deactivated. However, the automatic door locking will only be deactivated
if the temperature inside the appliance is less than 280
0
C.
H
OW TO FORCE THE DEACTIVATION OF THE DOOR LOCKING MANUALLY
The door locking is activated or deactivated as soon as the corresponding
requirements are met.
❖
The door locking is not intended to be manually deactivated by default . If
it necessary to deactivate the door locking manually, you have to force this
deactivation. Proceed as follows.
1. The oven must be in
STANDBY MODE
. In
STANDBY MODE
, the display indicates
the time / system time and the indicator «
TIME
/
SYSTEM TIME
» is on.
2. Press and hold the buttons «
TIME
» and «
PAUSE
/
CANCEL
»
simultaneously to force the deactivation of the door locking manually.
3. An acoustic signal sounds and the indicator of the door locking « » goes off.
4. The door locking is deactivated. The door of the oven can be opened carefully.
WARNING! Be careful if you open the door. Do not get in contact with
the hot parts of the oven or the steam, which will escape the oven. RISK
OF BURNS! RISK OF SCALDING! RISK OF INJURY!
WARNING! The interior parts of the oven can still be extremely hot .
Do not touch any parts inside the oven until the oven has cooled down
completely. RISK OF BURNS! RISK OF INJURY!
P
LEASE NOTE
: if you have forced the deactivation of the door locking manually, you
must always reset the oven ; otherwise the appliance cannot be used properly.
Proceed as follows.
1. Disconnect the appliance from the mains.
2. Connect the appliance to the mains again.