PJLink DLP MP-WU9101B Скачать руководство пользователя страница 1

Страница: 1 / 81

DLP

Projector

MP-WU9101B

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, read all manuals for this product.

Be sure to read

Safety Guide

first. After reading them, store them in a safe

place for future reference.

WARNING

NOTE

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect handling.

Refer to the pages written following this symbol.



NOTICE

This entry notices of fear of causing trouble.

• The information in this manual is subject to change without notice.

• The illustrations in this manual are for illustrative purposes. They may differ

slightly from your projector.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

Содержание DLP MP-WU9101B


















































































Результаты поиска

Содержание DLP MP-WU9101B

Отзывы:

Похожие инструкции для DLP MP-WU9101B

Бренды по названию

Популярные бренды

PJLink DLP MP-WU9101B, Руководство пользователя

Результаты поиска

Содержание DLP MP-WU9101B

Отзывы:

Похожие инструкции для DLP MP-WU9101B

Бренды по названию

Популярные бренды