4
Projector features / Preparations
Fastening the lens cover
To avoid losing the cover, please fasten the lens
cover to the projector using the included strap.
Put the strap end into the slit of the lens
cover with the knot on the side of the lens.
Make sure that the strap is inserted to the
end of the slit.
Fasten the strap to the strap hole as shown
in the figure for step 1. Please note that the
knot on the strap is used to fasten it to the
lens cover in step 2.
1.
2.
►Do not hang the lens cover in
front of the lens when the projector is mounted
upside down such as when mounted on the
ceiling. Otherwise, the lens cover may block the
light from the projector or hit the lens, which may
cause damage to it. When mounting the projector
upside down, hang the lens cover on the side of the
projector or place it on the projector. For instance,
wrap the strap around the elevator foot to hang the
lens cover (refer to the figure).
CAUTION
Lens cover
Strap slit
Strap hole
Strap
1
2
