Pixsys TD320 Скачать руководство пользователя страница 72

Страница: 72 / 75

take as parameters the number of digits to convert, starting

from the least significant digit. The coded data will be saved

(one digit per word) starting from the destination word and

then in the successive words according to the number of digits

requested.

•

TO_7SEG_UNSIGNED:

This is analogous to the above

description with the difference that the data of origin is

interpreted as a word without sign (0..65535). The code is

comprised of a bit set to “1” if a segment should be lit, and “0”

if the segment should remain dark. The association between

the bits and the segments of the display is the following:

•

TO_ASCII_SIGNED:

Convert the input data (a word with sign

–32768..+32767) into ASCII-coded digits. The function will

take as parameters the number of digits to save. The coded

data will be saved (one digit per word) starting from the

destination word and then in the successive words according

to the number of digits requested.

•

TO_ASCII_UNSIGNED:

This is analogous to the above

description with the difference that the data of origin is

interpreted as a word without sign (0..65535).

Содержание TD320












































































Результаты поиска

Содержание TD320

Отзывы:

Бренды по названию

Популярные бренды

Pixsys TD320, Руководство пользователя

Результаты поиска

Содержание TD320

Отзывы:

Бренды по названию

Популярные бренды