Pixsys ATR 902, Руководство пользователя

Страница: 14 / 32

14 - ATR902 - User manual
8 Cycle start
8.1 Start of a cycle and setting of delayed start
Red display visualizes
stop
.
Press Display Do
1
CYCLE
Red display visualizes the cycle
selection.
Press CYCLE to scroll the cycles
(
cy.02
for cycle no. 2 -
cy.15
for
cycle no. 15) until visualize the
chosen cycle.
2
START
STOP
Cycle starts . Buzzer sounds briefly.
Green display shows the process
while red display shows the
setpoint introduced on parameter
14
ui.d.2
NB: only cycles already
programmed can start.
If delayed start is active ( see parameter 15
de.st.
) proceed as follows:
Press Display Do
3
START
STOP
Red display visualizes
WAit
Green
display shows (flashing)the
programmed waiting time.
4
Increases or decreases the initial
waiting time (hour:minutes).
5
START
STOP
Waiting starts.
When the programmed time
expires, cycle will start.
Press or to modify the
time.
8.2 Fast advancement function
During functioning or after a restart it can be useful to move onwards or backwards
the cycle in progress, to reach chosen setpoint value.
Press Display Do
1
START
STOP
Forwards or backwards (each
beep of internal buzzer means
one minute).
To end the cycle and
stop
the
controller before the normal
conclusion, press
START
STOP
for a 1”.