V- button.
Factory Reset:
Restore to the factory settings.
HPos: <OSD horizontal Position>
Controls the horizontal OSD (On Screen Display) position within the display
of the LCD. Use the V+ or V- button to move the OSD right or left.
VPos: <OSD vertical Position>
Controls the vertical OSD position within the display of the LCD. Use the V+
or V- button to move the OSD up or down.
Select the
Tune
Icon to adjust the following:
Use the C+ or C- buttons to increase or decrease the selections, then select
by pressing OK.
Store:
Changes store TV channel. Use the V+ or V- button to change the channel up
or down. (0~255 channels)
Skip:
Use to skip the scrambled channels. Use the V+ or V- button to change the
skip of channel ON or OFF.
Band:
Make use of band selection to quicken the searching process in your desired
band. Use the V+ or V- button to change the band VFL, VFH or UHF.
MST: <Manual Search Tuning>
When sound and picture’s effect of a channel is poor (for example: one or
two CATV channel’s sound and picture are not standard), you can correct
them by making use of Manual Search Tuning. Use the V+ or V- button to
tune.
Search:
Use to search for current channel using the frequency. Use the V+ or V-
button to search. Use the V+ or V- button to search.
Auto:
This is a simple and easy method to search the channels. All active channels
will be preset and stored into the memory automatically. After presetting, the
TV will return to the first channel program.
During the process of AUTO SEARCH, you can press the AUTO button on
the remote control and it will stop the process and the TV will return to the
first channel program.
Picture
VGA Setup
Icon (In VGA & DVI mode)
