32
UI Element
Description
Sink Power
Management
Set display to enter standby mode or to return to their
normal working state through CEC capability or
RS232 commands.
Sink Power Mode
both
: Enable both CEC and RS232 mode to
manage the sink power.
cec
: Enable CEC to manage the sink power.
rs232
: Enable RS232 to manage the sink power.
By default, it's set as
both
.
Interval between
two consecutive
commands to the
sink (Second)
Specify a time interval between sending two
consecutive commands to the sink (in seconds).
The interval should not be less than 0s.
Note:
If you’re not clear about this function, it’s
suggested that you make no changes here or contact
with the manufacturer.
By default, the interval is set as
8
seconds.
RS232 Parameter
Set the RS232 parameters for the controlled display.
For more information about the parameters, see the
user guide of your display devices.
Parameter
Value
Abbreviation
Baud Rate
9600bps
9600
Data Bits
8bits
8
Parity
None
n
Stop Bits
1
1
By default, its set as
9600-8n1
.
RS232 standby
command
Enter the RS232 standby command of a controlled
display device. For more information about the
command, see the user guide of your display devices.
If you want to disable this function, you can enter
nothing here.
By default, it’s set as blank.
RS232 wakeup
command
Enter the RS232 wakeup command of a controlled
display device. For more information about the
command, see the user guide of your display devices.
If you want to disable this function, you can enter
nothing here.
By default, it’s set as blank.
RS232 hex string
enable
Enable
: select to use the hex numbers of RS232
standby and wakeup commands to control your
