31
UI Element
Description
Output HDCP
Support
Set the HDCP capability for the HDMI output. Two
options are offered in the following:
Enable:
select to enable HDCP capability of the
output.
Disable:
select to disable HDCP capability of the
output.
By default, it's set as
Enable
.
Auto Standby
(0~60 minutes)
Set a period of time that remains before the countdown
timer begins for auto standby.
•
For example, when the current input is Guide
Screen, 1 minute means if there’s no signal present
at the display in 1 minute, the countdown timer for
display standby begins; when the timer ticks to
zero, the display enters standby mode.
Note:
If the connected display doesn’t support
CEC or isn’t correctly set with RS232 commands,
the word “Standby” appears in the middle of the
Guide Screen.
•
If it’s set to 0 minute, it means this function is
disabled, you cannot set the display to standby
mode.
By default, auto standby is set as
1
minute
.
Apply
Click to perform current settings.
Sink Power Management