5
Panel Description
a
1
2
3
4
5
6
7
8
9
10
11
12
13
b c d f
No.
Name
Description
a
SET
Function set DIP Switch:
Enables/disables the Long Reach Mode.
RS232 updates /pass-through the device.
Choose USB Device or USB Host mode.
b
Power LED
ON:
The receiver is powered on.
OFF:
The receiver is powered off.
c
Status LED
Flashing Slowly:
The receiver is working properly.
OFF:
The receiver is not working properly.
d
HDCP LED
ON:
HDCP video is being transmitted.
Flashing Quickly:
Non-HDCP video is being
transmitted.
OFF:
No HDMI signal.
e
Link LED
ON:
HDBT link is normal.
Blinking/OFF:
No HDBT Link or link is unstable.
1
DC 12V
12V DC power input, threaded port for standard or locking
connection, two-pin phoenix port for additional power
connection.
2
HDBT IN
Connect to HDBT OUT port of PF-MS82T or HDBT
Transmitter.
3
L/R OUT
Analog audio output, 3.5mm analog audio pass through
from transmitter in to receiver out over HDBT.
4
HDMI OUT
Connect to an HDMI display device
5
RS232
RS232 pass through or firmware update.
6
IR IN
Connect to IR receiver to enable control of source from
display location.
7
IR OUT
Connect to IR emitter to enable control of display from
source location.
8
HOST
Connect to USB Host device to be controlled such as
server, computer etc.
