10
2. Connect HDMI OUT
Connect an HDMI display device (such as TV, projector, LED/LCD
display) to the HDMI OUT of the receiver.
3. Connect HDBT IN
Connect HDBT OUT of the PF-MS82T switcher to HDBT IN of the
receiver with a Cat 5e/6/6a/7 cable.
4. Connect for additional control options:
•
ETHERNET:
Connect an active Area Network/PC to the ETHERNET
1/2 port of the receiver, connect a PC/Local Area Network to the
ETHERNET port of PF-MS82T switcher/transmitter (Support
Ethernet pass-through), the PC can be connected to the Area
Network.
•
IR:
For bi-directional IR pass through, connect an IR emitter to IR
OUT of the receiver/switcher (or transmitter supports IR
pass-through), an IR receiver to IR IN of the switcher (or transmitter
supports IR pass-through)/receiver. the source remote can control the
source at receiver side, or display remote can control the display at
the switcher (or transmitter supports IR pass-through) side.
•
RS232:
Connect to a control or slave device to the receiver, set DIP
Switch to “UP, X, X” position (see “DIP Switch Settings” section).
Connect a slave or control device to RS232 Port for HDBT OUT of
PF-MS82T switcher, they can realize RS232 pass-through.
•
USB:
Set the DIP switch of the receiver to “X, UP, X”, the devices on
the PF-MS82T switcher can be connected to the host PC connected
with the receiver. Set DIP switch of the receiver to “X, DOWN, X”, the
USB devices of the receiver can be connected with Host PC
connected with the receiver.
•
S/PDIF Pass-Through:
When the receiver is connected with the
transmitter supports S/PDIF pass-through, Connect the audio source
such as a DVD player to the S/PDIF IN port of the
