8
No. Name
Description
1
DC 12V
Connect to the DC 12V power adapter.
2
Audio Out
Connect to an audio decoder such as an amplifier
for audio de-embedding output from HDMI
source.
3
HDMI Out
Connect to an HDMI display device.
4
RS232
Connect this port to a RS232 device to
bidirectionally communicate with a RS232 device
at the IP control box or encoder side.
5
LAN (POE)
Connect to an Ethernet Switch for IP streaming
input and device control.
Note:
The encoder and decoder can be powered
by either a PoE-enabled Ethernet switch via this
port or power adapters.
6
Reset LED
Reset key is used to reset device.
Use a pointed stylus to hold down this key, when
Reset LED is on for about 1 second and then off,
release this key, decoder reboots and restores to
its factory default.
7
Reset Key
