7
No. Name
Description
Note:
The encoder and decoder can be powered
by either a PoE-enabled Ethernet switch via this
port or power adapters.
6
Reset LED
Reset key is used to reset device.
Use a pointed stylus to hold down this key, when
Reset LED is on for about 1 second and then off,
release this key, encoder reboots and restores to
its factory default.
7
Reset Key
Decoder
Front Panel
3
2
1
No. Name
Description
1
Power LED
On:
Decoder is powered on.
Off:
Decoder is powered off.
2
Status LED
On:
Decoder is connected to an encoder and
detects valid signal input.
Blinking:
Decoder is not connected to an
encoder or detects no signal input.
Off:
Decoder is powered off or in the boot
process.
3
ID Key
Press to display information of encoder and
decoder on the screen, including IP mode, MAC
address and IP address.
Rear Panel
7
6
5
4
3
2
1
