Pixel Magic Plasma Enchancer PE1000, Руководство по эксплуатации продукта

Страница: 15 / 30

13
Hardware Installation
Installation
Alternative AV Receiver / Processor Connection
Depending on the quality and available input switching you may find it simpler
connecting all AV sources directly to your AV receiver and use the monitor
outputs as the input feed into the Plasma Enhancer . This allows a greater
number of source components to be connected.
®
1 Preparation:
Make all required audio and video connections between
source components and AV receiver. Use the best connection for
each source i.e. Component Video for the DVD player etc. If your
amplifier does not provide a component video input, connect your
DVD player directly to the Plasma Enhancer
®
.
2 Allocation & Connection:
Ensure all devices are powered OFF; if
source components are connected via a mixture of: Composite Video,
S-Video & Component Video connections, feed all corresponding
Monitor output connections into the required inputs of the Plasma
Enhancer
®
.
3 Setup:
Switch ON your Plasma Enhancer
®
, AV device(s) and display
device(s). Setup your Plasma Enhancer
®
according to the next
section, Basic System Setup.
Tips: If you connect the monitor outputs of your AV Receiver to the Plasma
Enhancer , ensure any available video signal conversion within the AV
receiver itself is switched off. The sophisticated processing and scaling
within the Plasma Enhancer is dedicated to this task.
®
®