Pixel Magic Plasma Enchancer PE1000, Руководство по эксплуатации продукта

Страница: 14 / 30

Hardware Installation
Installation
AV Device Connection
Plasma Enhancer embraces a comprehensive set of input terminals that allow
you to connect to a wide range of video devices.
®
Follow the below steps to install:
1
Preparation:
List all AV devices that you wish to connect to Plasma
Enhancer
®
for outputting processed video.
2
Allocation:
Decide which input terminals of your Plasma Enhancer
®
to use for your AV device(s), and set aside the high quality terminals
to this source(s) i.e. DVD player with Component video output should
be connected to the Component terminal of AV1. Make sure all
required cables are available.
3
Connection:
Ensure all devices are powered
OFF
; connect the AV
device(s) to your Plasma Enhancer
®
with the appropriate terminals
and cables.
4
Setup:
Switch ON your Plasma Enhancer
®
, AV device(s), and display
device(s). Set up your Plasma Enhancer
®
according to the next
section, Basic System Setup.
Deciding which video input to
use for your AV device(s):
(Best
quality first)
1 AV1
: Component x 1, S-Video x 1,
Composite x 1 with stereo audio x 1
2 AV2
:
S-Video
input x 1 with stereo
audio x 1
3 AV3
on side panel: S-Video x 1,
Composite x 1 with stereo audio x 1
(this is designed for convenient
connection to portable AV devices
such as DV recorder)
Tips:
It is recommended that you
choose the interlaced output from
your AV devices, instead of
progressive (e.g. 480i instead of
480p). This leaves the conversion
from interlaced video to
progressive video to be performed
by
Plasma Enhancer
®
, which has
sophisticated processing
dedicated to this task.
Optional AV Amplifier Connection
Antenna Connection
1 Ensure all devices are powered
OFF
; connect the VHF/UHF to your
Plasma Enhancer
®
with an antenna cable.
2 Switch ON your Plasma Enhancer
®
and set up TV channels
according to section 3, TV Setup.