4. Wireless Flash Shooting
Wireless Flash Shooting: Radio (2.4G) Transmission
3. Setting the Communication Group
Short press the <GR/CH> Button to choose group ID from A to E.
Positioning and Operation Range (Example of wireless flash shooting)
• Autoflash Shooting with One Slave Unit
● Use master unit with wireless transmitting function as the transmitter end.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on the conditions such as
positioning of slave units, the surrounding environment and whether conditions.
Transmission distance is about 100m
1. Wireless Settings
Press <
> Wireless Setting Button again until <
> is displayed on the panel.
Long press the <GR/CH>
1
Button for 2 seconds so that
channels ID is displayed on
the LCD panel.
Turn the Select Dial to choose a
2
channel ID from 1 to 32.
Press the <SET> button
3
to confirm.
2. Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal
interference. The channel IDs of the master unit and the slave unit(s) must be set to the same.
Wireless Flash Shooting: Radio (2.4G) Transmission
CITI1200 Pro
Kit adopts
PiXAPRO
2.4GHz
wireless ONE system
, which has good compatibility
with other products of our company.
As a slave unit,
CITI1200 Pro
Kit is automatically compatible with Canon E-TTL II, Nikon i-TTL,
Sony, Olympus, Panasonic and FUJIFILM system according to the master unit.
*
As a slave unit,
CITI1200 Pro
Kit can be controlled by the following master units:
HyBRID
360
TTL
series,
Li-ion580
II series,
Li-ion350
II series,
ST-IV
series,
ST-III
series,
ST-III+
series,
GIO1 Series
Wireless ID setting: press the MENU button to enter
4
C.Fn-ID and choose from 01 to 99.
CH
1
TTL
A
10
%
CH
1
TTL
A
10
%
CH
32
TTL
A
10
%
C
.
Fn
RESET
Ver 0
.
6
LCD
ID
99
CH
1
Multi
E
OFF
1/
256
5 - 5
Hz
- 41 -
- 42 -
H1200P
