wXa-171-Aurora
Aurora
v2.0.
Copyright © Pivotel IP LLC. All rights reserved.
78
8.8.3.
Signal Monitor
Signal monitor queries your Aurora or GSM modem to determine if the signal strength is
sufficient to make a successful data connection. Typically, a minimum of 60% signal is
required; however, 100% is ideal for the fastest possible data transfer rate.
From this screen you can enable/disable signal monitor using the "Enable" checkbox.
You can change the level of the Signal Monitor. Keep in mind that 60% is typically the
minimum required for a successful data connection. If you must change the Signal
Monitor, we recommend lowering the Level vs. disabling it.
CAUTION: Reducing the signal strength to less than 60% or disabling it altogether may
cause lengthy data connections due to poor signal.
When you are done making changes, click <Save & Apply>.
