3
Settings
Explanation Of Function Settings
Fastening The Product
Unit
Double-sided
tape (Included)
(Example of Installation)
Installing The Unit
On the steering
column cover
While in use if wires become free they may interfere with
driving and cause accidents.
Also, pulling on wires may cause them to short and is
extremely dangerous.
As shown in the diagram below, use the double-sided tape to fasten
the unit into positions not usually affected by water.
Under cover
Press
Switch
Press
Switch
Press
Switch
Engine Stop
Key Switch On
Timer is in Operation
Key Switch Off
＝
15 minutes
(For Warm-up)
＝
9 minutes
＝
5 minutes
＝
3 minutes
＝
1 minutes
＝
OFF
＝
Auto
＝
30 seconds
＝
Security Mode
(Cautionary blinking
＋
Intimidating blinking)
＝
Power Saving Security Mode
(Cautionary blinking only)
＝
Security Mode OFF
(All blinking OFF)
Display changes in this order
Time Settings
Stopping The Security Mode
Switching The Security Mode
Auto setting of idling time in accordance to running time from key
switch ON.
When key switch is OFF, the LED helps guard your car. But upon any shock or impact to the body this
switches to an intimidating high-power and high-speed light for a determined amount of time (about 5
seconds).
The LED will continually blink 3 times at regular intervals.
Upon any shock or impact to the body the LED blinks
highly-power and highly-speed light for a determined
amount of time.
NOTE 1. The intimidating blink will not be activated for 30
seconds after the key is switched OFF to allow
you to get out of the car.
2. If the vibration of getting into to the car causes
the intimidating blink to be activated, turn the key
to ON to stop the blinking.
If there is a reoccurring impact such as heavy rain, the intimidating blink
will be automatically shut off for a period of time to save battery power.
NOTE; If during cancelled status, a strong impact occurs, the cancelled
status will be continued from 30 seconds after the impact.
Possible to make desired idling time settings.
Longest Time
Setting
The dot blinks during auto mode.
Running
Time
3 min
2 min
1 min
5 min 15 min 30 min 45 min
L
（
30S
）
Impact
Impact Impact
Impact
Impact
Impact
5
seconds
5
seconds
5
seconds
5
seconds
5 more
seconds
30 seconds
(Cancelled Status)
Auto Mode
Manual Mode
Security Mode
Intimidating Blinking
Cautionary Blinking
Cancel Blinking
Cancel Blinking
1 time in
3 seconds
Return to
Cautionary
Blinking
Warning
Status
Impact during this period
will result in canceling.
Auto Time
(How to Install)
Affix with double-sided tape
to a position which is easy to
see and which allows for
easy operation.
Clean to remove
oil and dust.
Please be sure to bundle away
all wires with tape, etc…
