Pivot SHUTTLE LT, Инструкции по эксплуатации

Страница: 13 / 24

www.pivotcycles.com info@pivotcycles.com 1.877.857.4868 10
Cycle Computer Warning Codes
• Warnings may appear on the cycle computer display if the
system detects an issue.
• The warning code will clear once the issue is resolved.
• If any issues persist after the suggestions below, contact the
place of purchase.
CODE ISSUE
OPERATIONAL
RESTRICTION
REMEDY
W010
Drive unit operation tempera-
ture is higher than normal Power assistance may be lower
than usual Stop using the assist function until the
drive unit temperature drops
W011
Traveling speed cannot be
detected Maximum speed may be lower
than usual Check that the speed sensor is installed
correctly
W013
Torque sensor was not initial-
ized properly Power assistance may be lower
than usual Turn the power off and back on again
W020
Battery operation temperature
is higher than normal No system functions will start Leave the battery in a cool place until
the temperature decreases sufficiently
W032
Shifting unit installed differs
from unit configured in system Unable to perform gear shifting Update shifting configuration in E-Tube
Project app
W10000
Drive unit operation tempera-
ture is higher than normal Power assistance may be lower
than usual Stop using the assist function until the
drive unit temperature drops
W10100
Traveling speed cannot be
detected Maximum speed may be lower
than usual Check that the speed sensor is installed
correctly
W103
Sensor initialization could not
be completed normally Power assistance may be lower
than usual Turn the cranks in reverse two or three
times
W10300
Sensor initialization could not
be completed normally Power assistance may be lower
than usual Turn the cranks in reverse two or three
times
W104
Power was turned off due to
current leakage detected Power assistance will not be
provided while riding Remove components from drive unit and
turn on to find faulty component
W10400
Power was turned off due to
current leakage detected Power assistance will not be
provided while riding Remove components from drive unit and
turn on to find faulty component
W10500
Unexpected power disconnec-
tion was detected There are no restricted assist
functions while displayed Check the power cord for damage. Turn
the power off and back on again
W20000
Battery operation temperature
is higher than normal No system functions will start Leave the battery in a cool place until
the temperature decreases sufficiently
W30200
Shifting unit installed differs
from unit configured in system Unable to perform gear shifting Update shifting configuration in E-Tube
Project app
TROUBLESHOOTING