Piusi MC BOX, Инструкции по установке, использованию и обслуживанию

Страница: 49 / 56

49
/124 49
/56
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
(translated from italian)
MC BOX
16 DAILY USE
Thanks to the MC control system, all the MC BOX models provide access to
authorised users only. MC acknowledges User authorisation by means of two
alternative systems:-The entering of a 4- figure SECRET CODE (PIN CODE).-
The fitting of an electronic key (OPTIONAL).
ATTENTION All the users to whom a PIN CODE is assigned must be adequately instruct-
ed and beat least acquainted with the contents of this chapter.
The configuration of the MC system permits requiring the User to enter fur-
ther optional data(vehicle licence plate, mileage, quantity to be dispensed).
See MC manual for details. If these options are not set, MC recognises an
authorised PIN CODE and immediately enables the pump to dispense fuel.
ATTENTION Such enabling does not result in immediate pump startup. The pump is in
fact controlled by a switch (positioned in the nozzle seat) operated by the
user.
The pump will start (if previously enabled) just as soon as the control lever
is moved to ON position, while it switches off as soon as the control lever is
moved to OFF position. No further manual operation is required to start or
stop the pump.
16.1 FUEL DISPENSING
ATTENTION Fuel shall be ABSOLUTELY dispensed under the User’s strict supervision.
In case of simple configuration (no optional data to be entered), dispensing
takes place as follows:
•Insert PIN CODE
(or apply the electronic key) If the MC recognises the activated PIN (or key), a
“GOOD MORNING MANAGER / USER” message is displayed and the pump
enabled. For details on dispensing options, please refer to the M0187 manual.
G O O D M O R N I N G
M A N A G E R