Piusi MC BOX, Инструкции по установке, использованию и обслуживанию

Страница: 39 / 56

39
/124 39
/56
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
(translated from italian)
MC BOX
11 TECHNICAL FEATURES
INTENDED
USE
Implementation of a fluid dispensing system, intended for private use, not sub-
ject to special regulations (e.g. ATEX) for potentially explosive environments.
ATTENTION DO NOT INSTALL MC BOX IN ENVIRONMENTS CLASSIFIED AS POTENTIAL-
LY EXPLOSIVE IN ACCORDANCE WITH ATEX REGULATIONS.
ELECTRICAL
ABSORP-
TIONS:
The maximum acceptable variations from the electrical parameters are:
• V/-10 % for AC versions
• V/-15 % for battery-operated DC versions
• Fre/-1% (+/-2% for short periods) (for AC versions)
See following the technical data sheet:
ATTENTION BEFORE INSTALLATION, ALWAYS CHECK THAT THE STATION MODEL IS
CORRECT AND SUITABLE FOR THE SUPPLY EFFECTIVELY AVAILABLE
(VOLTAGE / FREQUENCY).
MC BOX80-120 USER
MC BOX LITE 20 USER
230Vac/50-60Hz
MC BOX80-120 USER
MC BOX LITE 20 USER
110Vac/50-60Hz
MC BOX
MC BOX LITE
12v
MC BOX
MC BOX LITE
24v
Nominal Power
Voltage
230 Vac 110 / 120 Vac 12 Vdc 24 Vdc
Nominal (Hz)
Frequency
50/60 Hz 50/60 Hz
Nominal
Current
absorbed in
standby
at room T 25°C
40 mA 80 mA 150 mA 75 mA
Board fuse on
power Line
100 mA (Rit.) 200 mA (Rit.) 1 A T (Rit) 1 A T (Rit.)
Max current on
Motor (A)
6,5 A 13 A 50 A 25 A
Fuse on line
Motor
8 A T (Rit.)
2 fuses 1 A T (Rit.) on
board to drive the
contactor
1 fuse 16 A T (Rit.) along
the cable of contactor
Size according
to the power of
the connected
DC 12V motor,
but must NOT
exceed 60 A
(automotive)
Size according
to the power of
the connected
DC 24V motor,
but must NOT
exceed 30 A
(automotive)