Piusi DELPHIN PRO X, Быстрое руководство, Страница: 17 / 20

17
/124 17
/20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
delphin PRO_X QUICK GUIDE
translated from italian
2 - DIRECT MODIFICATION OF THE CALIBRATION FACTOR
The direct correction of the Calibration Factor is useful when:
- the K Factor in use must be corrected by a known percentage;
- a K Factor already known must be added.
When the DISPLAY displays:
Blinking
+
Press the ENTER key, release it and press the ENTER key again.
The DISPLAY displays:
Blinking
The SYSTEM is ready to accept the direct modification of the K Factor.
- Press the “10” key to increase the indicated value.
- Press the “0.1“ key to decrease the indicated value.
Each time a key is pressed, the last digit on the right is modified by one unit.
By keeping the keys pressed, the value changes, slowly at first and then rap-
idly.
Press the ENTER key to confirm that the correction of the indicated value is
over.
The SYSTEM stores the new Calibration Factor (K Factor) and displays:
CAL-End
Blinking alternately
New K Factor
After a few seconds the SYSTEM automatically exits the customization mode
and starts using the new Calibration Factor.
To exit the customization mode, independently from the activity in progress,
press RESET. The currently displayed settings become immediately opera-
tional.