Piusi DELPHIN PRO X, Быстрое руководство, Страница: 12 / 20

M0495A
12
/20
quick guide to use
3.3 ALARM SIGNALS THAT DO NOT BLOCK THE SYSTEM
Alarms that are reported to be resolved, but allow dispensing
+
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
+
1 -IN PRESET MODE:
Pre-set quantity not reached
[flashing with 1 pulse PER SECOND OF
STATUS LED WHILE FLASHING THE
TOTAL SUPPLIED DISPLAYED ON
THE DISPLAY]
The tank has filled before reaching the
pre-set quantity.
The system hears it and stops the dis-
pensing signaling the anomaly.
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
2 - METER MALFUNCTIONING:
The meter is faulty and does not count,
but the pump delivers anyway
[3-pulse flashing red alarm LED]
It is possible to dispense without being
able to count. Repair the liter counter.
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
3 - BATTERY CHARGER MALFUNC-
TION/BATTERY DISCONNECTED/
BATTERY DAMAGED
[Fixed alarm red LED]
Dispensing is possible but check that
the battery is connected. If the problem
persists, contact the Piusi Service. If the
battery is damaged, replace it.
3.4 ALARM SIGNALS THAT BLOCK THE SYSTEM
Alarms reported to be resolved that prevent dispensing.
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
1 - IN MANUAL MODE: SELECTED
MINIMUM CAPACITY TOO HIGH
[flashing A 2 STATUS LED IMPULSE]
At 5 sec. from the beginning of the de-
livery, the system signals if the selected
flow rate is excessive compared to the
tank configuration and stops the delivery.
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
2 - IN MANUAL MODE: MAXIMUM
DELIVERY TIME REACHED (20 MIN.)
[1 - pulse flashing red LED]
In accordance with the conditions of
use of the pump, the system allows con-
tinuous dispensing for a maximum of
20 minutes. After 20 minutes the sys-
tem stops the pump.
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STATUS
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1 1 10
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
3 - MALFUNCTION OF THE OVER-
CURRENT PUMP
[2 - pulse flashing red alarm LED]
The system blocks the pump in case of
overcurrents in the power supply.