5.9.1 edit mode
Edit mode is used to modify the midi channel, pitch bend range, control change
(cc) number, and clock source parameters. All changes made in edit mode are
saved in memory and recalled when the Lifeforms SV-1 module is powered on.
Enable edit mode by pressing and holding the [edit button] down for 1
second.
The [mono led], [arp led], [gate led], and [clock led] will blink 3 times to
indicate edit mode is enabled.
Disable edit mode by pressing and holding the [edit button] down for 1
second.
The [mono led], [arp led], [gate led], and [clock led] will blink 3 times to
indicate edit mode is disabled.
16
5.9.2 modify edit mode parameters
To modify the midi channel
, tap the [edit button] until the [mono led] is blinking.
Pressing the [hold button] cycles through available options. Respond to all
channels followed by channel 1 through channel 16. The number of times the
LED blinks corresponds to the selected midi channel: 1 blink for channel 1, 2 for
channel 2, etc… For all channels, the [mono led] will blink at a steady rate.
To modify the pitch bend range
, tap the [edit button] until the [arp led] is
blinking. - The pitch bend parameter assigns the range of the pitch bend.
Pressing the [hold button] cycles through available options: 2 semitones (+/- 2
notes), 8 semitones (+/- 5th), 12 semitones (+/- 1 octave), 24 semitones (+/- 2
octaves).
The midi module assigns the cc channel based the last incoming cc
message it receives.
Simply move a mod wheel or turn a knob to assign that
midi cc number to the midi module. The cc source is saved in memory and
recalled when the Lifeforms SV-1 module is powered on.
The [clock button] cycles through the three available clock sources
. Internal
clock, external midi clock, external gate clock. The number of times the [clock
led] blinks identifies the selected clock source. One blink represents the internal
clock. Two blinks represents external midi clock. Three blinks represents
external gate clock. The active clock source is saved in memory and recalled
when the Lifeforms SV-1 module is powered on.
