Pittsburgh Modular lifeforms sv-1, Руководство пользователя

Страница: 15 / 45

5.7 hold function
The hold function works di ff erently in monophonic and arpeggiator modes. In
monophonic mode, the hold function latches the gate output high until the hold
function is disabled.In arpeggiator mode, the hold function allows the
arpeggiator to cycle through the last set of selected notes after the selected
notes have been unpressed.
In monophonic mode, enable the hold function by pressing the [hold button].
The hold function latches the gate output high. The [mono led] will blink while
the hold function is enabled.
Disable the hold function by pressing the [hold
button].
The [mono led] will stop blinking to verify the hold function is disabled.
In arpeggiator mode, enable the hold function by pressing the [hold button].
The hold function allows the arpeggiator to cycle through the last set of selected
notes after the selected notes have been unpressed. The [arp led] will blink while
the hold function is enabled.
Disable the hold function by pressing the [hold
button]. The [arp led] will stop blinking to verify the hold function is disabled.
5.8 glide
The [glide knob] adds portamento to the midi [v/o output jack] creating smooth
transitions between midi notes. Turning the [glide knob] to the right increases
the length of time it takes to glide from one not to the other.
15