5
5
6
7
8
9
10
11
12
Introduction
Moistener Tank
This tank holds EZ-Seal® solution or water to moisten and seal envelope flaps. It
slides out to the right for refilling and has an oval level indicator window at the
front so that you can easily check the fluid level.
Lifting Handles (one each side)
Always lift the DI200 using these handles. DO NOT lift the machine by any of the
feeders or stacker.
Standard Sheet Feeder A1
This feeder enables folding and inserting of a sheet into the envelope. Always
load sheets into this feeder face down and bottom edge first. i.e. the bottom
edge of the sheet furthest into the machine.
Second Sheet Feeder A2 (optional)
You can add this feeder to enable folding and inserting of a second sheet into the
envelope. It functions in exactly the same way as the standard sheet feeder A1.
IMPORTANT: When both sheet feeders A1 and A2 are used together, always
load the address bearing sheet into sheet feeder A2. If you don’t, the address
won’t show in the envelope window. Always load sheets into this feeder face
down and bottom edge first. i.e. the bottom edge of the sheet furthest into the
machine.
Refer to the ‘Warning’ on page 2 before moving a machine which has the second
sheet feeder A2 installed.
Manual Feeder M
Use this feeder to manually feed stapled or unstapled sets of up to 3 sheets. The
machine waits for you to feed each set by hand into this feeder before it folds and
inserts the set automatically. Sheets are always fed into this feeder face down
and bottom edge first. i.e. the bottom edge of the sheet furthest into the
machine.
Stacker
Finished items are delivered to this area.
Front Cover D Release Button (blue button marked D)
Press this button to release the front cover if a stoppage occurs in this area of the
machine. The display prompts you if this cover needs to be opened to access
material.
Envelope Feeder B
This feeder feeds envelopes into the inserting area where they are filled with
sheets or inserts requested from the other feeders.
