Pitney Bowes da95f, Руководство оператора

Страница: 30 / 92

2 • Printer Basics
2-14 SV61749 Rev. D
8. Adjusting the Media Thickness Knob
The media thickness knob sets the distance between the print heads
and the material you are running. Use it to compensate for different
material thicknesses and to increase clarity of the printing.
NOTE: All material in a run must be the same thickness.
1. Raise the media thickness knob to the
thickest setting, (fully clockwise).
2. Place a piece of the material you are
running on the printer deck under the
exit rollers.
3. Lower the exit rollers by turning the media thickness knob
counter-clockwise until the exit rollers are just touching the
material.
IMPORTANT:
• Adjusting the media thickness knob too far counterclockwise
for your media type (tighter gap) may cause smearing or
jamming.
• Adjusting the media thickness knob too far clockwise for
your media type (wider gap) may cause light print or broken
characters.
Media Thickness Knob
Exit rollers are touching printer
deck. Media thickness knob
adjusted to thinnest setting.
Exit rollers are lifted off of printer
deck. Media thickness knob
adjusted to thickest setting.
Insert material here between
exit rollers and printer deck.