To check the COOK and HOLD times press the followed by the product key you wish to check.
The times will be displayed in sequence followed by a short pause, finally returning to the normal cook
mode.
When the computer is calling for heat the two lights in the lower comers of the key will illuminate.
Programming Cook & Hold Times.
To set the COOK time press the key then the key. Enter the desired product key and change the
desired time by using the numbered keys. Press the key and the HOLD time will be displayed and may
be changed using the numbered keys. Press the key again and the next product key may be programmed.
Pressing the key two times at any point during this procedure will return you to the normal cook mode.
Programming Cooking Temperature.
This setting determines the thermostat setting for the computer. Unlike conventional thermostats,
once the computer is set it will never need calibration. Set the desired temperature by performing the
following procedure.
Press the key followed by the key. The new COOK temperature may now be set using the
numbered keys. Pressing the key two times at any point during this procedure will return you
to the normal cook mode.
Level 2 Programming.
There are several features that merit mention at this point. Their programming functions are explained along
with their descriptions.
To enter the level 2 programming mode press the key followed by the key. If a password has
been set you will be asked to enter it, if you do not remember what the password is use "6684". This
will allow you to program these basic functions and reset the password.
To choose between "°F" or "°C" press the key and use the key to toggle between the options.
To set "PASSWORD REQUIRED" or "NO PASSWORD" press the key and use the key to toggle
between the two options. To set a new password press the key and enter a four digit password.
Press the key again and the display will return to the normal cook mode. To continue setting level
options in the level 2 programming you must re enter to level 2 programming mode in the same
manner as before.
To set the beeper volume press the key and use the key to toggle between the options.
Pressing the key two times at any point during this procedure will return you to the normal cook mode.
To exit the level 2 programming mode at any time press the key two times. This will return you to the
normal cook mode.
15