T R U E S C A N
3
S T A N D A R D I N S T A L L A T I O N I N S T R U C T I O N S
1. Place the TrueScan mouse on the table and connect the power adapter
to the wall outlet.
2. Connect the PS2 type mouse connector to the socket in triple adapter
cable.
3. Connect the Video cable to the Cinch Video output connector in the
triple adapter cable, if necessary use the adapter provided.
4. Connect the other end of the video cable with the RCA male connector
to the VCR or video input 1 on your monitor or display.
5. Connect the DC power adapter connector to triple adapter cable.
6. Upon power up, the mouse will run a self test sequence turning different
lights on and remains off in standby mode until a button is pressed.
Click any mouse button to start TrueScan analysis. The unit is now ready
to analyze a document.
Attention:
never attempt to connect the mouse as a regular mouse to
the PS2 port on a PC
since this could cause
damage to both.
TrueScan only looks
and feels like a regular
mouse but it is not a
PS2 mouse. Instead it
LV ´WKH ZROI GUHVVHG DV
VKHHSµ 2Q WKH VDPH
token, never connect a
standard PS2 PC
PRXVH WR 7UXH6FDQ·V
triple adapter cable.
Содержание TrueScan
Страница 1: ......
Страница 8: ...T R U E S C A N 7 Figure 11...
Страница 16: ...T R U E S C A N 15...