ENGLISH
TROUBLESHOOTING
Problem
Possible Cause
Solution
Burners will not light
using the ignitor.
Burners not
assembled correctly.
See re-assembly after cleaning in
"Care and Maintenance."
Not pressing igniter
in enough for spark.
Push Regulator Knob in and turn
counterclockwise to the "High"
position. Depress the igniter
button until a loud click is heard.
Repeat until the burner lights.
No spark - out of
place, loose, or
broken.
1. Electrode tip is bent (making
too large or small of a gap
between the Electrode and
burner). Bend electrode tip
back to a 3/16" gap to burner
(Page 10).
2. Tighten Electrode mounting
screws.
3. Replace Igniter Wire/Electrode
assembly. (Call Customer
Service Department)
LP Gas Cylinder is
empty.
Purchase new 1 lb. LP Gas Cylinder.
LP Cylinder is not
fully attached to
regulator.
Tighten Cylinder by hand. Do not
use tools.
Obstructions in
Burners.
See
"How to Clean Burners"
in
Care and Maintenance.
Wet Electrodes and
Burners.
Allow electrode to air dry, dry with
clean cloth or blow dryer.
Wire loose or
disconnected.
Reconnect the wire.
Wire shorting
(sparking between
Igniter and
Electrode).
Replace Igniter Wire/Electrode
assembly. (Call the Customer
Service Department).
23
