16
EN
EN
G
LIS
H
UNDERSTANDING THE CONTROLBOARD
ThisP.I.D.(proportional-integral-derivative) digital Control Board is very much the same as the controls on your kitchen oven. The
main advantages are the ability to automatically compensatefor the different ambient conditions and fuel types.
IMPORTANT:The temperature inside of any grill will vary greatly from location to location. Eveninstruments
calibrated together may not agree with eachother.
CONTROL
DESCRIPTION
Pressthis button once to Power On the unit. This will begin the automatic start-up cycle.Pressand hold
this button for three secondsto Power-down the unit, activating the automatic cool-down cycle. The
button will light up solid white when connectedto a power sourceand when the unit is on.
The Smoke iT® icon indicates a connectivity with Wi-Fi. When searching for a connection by Wi-Fi or
via Bluetooth®, the Smoke iT®icon will blink. Once a Wi-Fi connection has been established, the Smoke
iT® icon will stay solid. When connected, get live updates about the actual and set temperatures of
the grill, cooking time, and meat probe temperatures. It also allows you to adjust the settings of your
Control Board.
This button has two functions: Temperature Units Switch and Light.
1. Quick push of this button to switch on and off the light inside the grill barrel.
2. Pressand hold this button for three secondsto activate the Temperature Units Switch, changing
the temperature readout. Changebetween Celsius(ºC)and Fahrenheit (ºF), as preferred. Default is
set to Celsius(ºC).
This button has two functions: Meat Probe Control (MPC)and Prime Button.
1. Thequick push of thisbutton activatesthe Programmable Meat Probe- which isthe first Meat Probe
plug-in port (MPC).Use the Controller Knob to set the Programmable Meat Probe temperature.
Pressthe Controller Knob again to confirm and exit the Programmable Meat Probe settings.
2. Pressand hold this button for three secondsto activate a manual continuous feeding of pellets to
the Burn Pot. Releasingthe button will stop the manual feeding of pellets. This can be used to add
more fuel to the fire before opening the barrel lid, resulting in a quick heat recovery.It can also be
used while smoking, to increase the intensity of clean smoke flavor. This feature was requested
from competition cookers.
MP1
MP2
MP3
MPC
