Pit Boss 71705 Скачать руководство пользователя

Страница: 9 / 32

6. PLACING THE GREASE BUCKET

Parts Required:

1 x Grease Bucket

(#12)

Installation:

• Place the grease bucket on the spout hook on the end of the main

barrel. Ensure it is level to avoid grease spills.

7. INSTALLING THE COOKING COMPONENTS

Parts Required:

2 x Cooking Grids

(#2)

1 x Upper Cooking Rack

(#1)

1 x Flame Broiler Main Plate

(#5)

1 x Flame Broiler Slider

(#4)

Installation:

• Insert the flame broiler main plate into the main grill. Rest the flame

broiler main plate on the built-in ledge (on the inside right) of the

main grill that directs grease towards the grease bucket. Slide the

entire piece to the left side, and the two slots on the flame broiler

main plate will fit into the rounded ledge above the burn pot. It will

sit slightly at a downward angle. Note illustration 7A.

NOTE: If the main plate is on the base of the barrel, it is installed incorrectly.

• Place the flame broiler slider on top of the flame broiler main plate,

covering the slotted openings. Ensure the raised tab is on the left,

to easily adjust for direct or indirect flame when cooking. Note

illustration 7B. Both flame broiler parts are lightly coated with oil to

avoid rusting when shipped.

NOTE: When the flame broiler slider is open, and direct flame is used

while cooking, do not leave the grill unattended for any period of time.

• Place the cooking grids, side-by-side, on the grid ledge inside the main

grill. Place the upper cooking rack on the upper ledge inside the main

grill. The cooking rack will lock into place.

• The unit is now completely assembled.

NOTE: To maintain the searing and grilling performance of your cooking

grids, regular care and maintenance Is required.

8. CONNECTING TO A POWER SOURCE

NOTE: Before plugging your Pit Boss into any electrical outlet, ensure

the Temperature Control Dial is in the SMOKE position.

•

STANDARD OUTLET

This appliance requires 110 volt, 60hz, 250w, 5 amp service. It must be a

3-prong grounded plug. Ensure grounded end is not broken off before

use. The control uses a 5 amp, 120 volt, fast-blow fuse to protect the

board from the igniter.

•

GFCI OUTLETS

This appliance will work on most GFCI outlets, with a recommended

size of 15 amp service. If your GFCI outlet is highly sensitive to power

Содержание 71705

































Результаты поиска

Содержание 71705

Отзывы:

Похожие инструкции для 71705

Бренды по названию

Популярные бренды

Pit Boss 71705, Инструкция по сборке и эксплуатации

Результаты поиска

Содержание 71705

Отзывы:

Похожие инструкции для 71705

Бренды по названию

Популярные бренды