ENGLISH
7
ASSEMBLY PREPARATION
Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister
pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill
before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt
to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss® Customer Care for parts.
[email protected] | USA: (480) 923-9630 | CANADA (TOLL FREE): 1-877-942-2246
IMPORTANT: To ease installation, using two people is helpful (but not necessary) when assembling this unit.
Tools required for assembly:
screwdriver and level.
Tools not included.
ASSEMBLY INSTRUCTIONS
IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws
completely until all screws for that step have been installed. Hardware combination involving a locking washer and
washer should be installed with the locking washer closest to the head of the screw.
1. MOUNTING THE LEGS TO BOTTOM SHELF
Parts Required:
1 x Bottom Shelf (#16)
2 x Wheel Leg (#12)
2 x Stationary Leg (#11)
4 x Screw (#A)
4 x Locking Washer (#B)
4 x Washer (#C)
Installation:
• Secure the bottom shelf to each leg using screw (#A), locking washer
(#B), and washer (#C). Ensure the flatter surface of the shelf is facing up.
• Fasten Screws of the support legs on half-way to allow easier
installation of main barrel in the third step.
1
A
C
B