ENGLISH
10
12. ATTACHING CYLINDER WIRE RETAINER
Parts Required:
1 x LP Gas Cylinder Wire Retainer
(#19)
Installation:
• Insert one end of LP Gas Cylinder Wire Retainer (not flattened) into the hole
for the Front Support Leg and the other end into the Back Support Leg.
13. INSTALLING THE UPPER COOKING RACK
Parts Required:
2 x Porcelain-Coated Upper Cooking Rack
(#1)
Installation:
• Place the Upper Cooking Rack on the upper ledge inside the Main Grill. The
Cooking Rack will lock into place.
14. INSTALLING THE SPICE BOX/ BOTTLE OPENER
Parts Required:
1 x Spice Box
(#10)
1 x Bottle Opener
(#7)
Installation:
• Remove the top two pretightened screws from SPice Box mounting
position on the side of the Hopper. Hang the Spice Box on the step screw
below the Hopper. then use the two screws just removed to lock the
Spice Box to the Hopper. Note illustration 14A.
• Remove the two pre-mounted screws for the Bottle Opener on the side
of the Hopper. Install the Bottle Opener in the same location using the
two screws previouisly removed. Note illustration 14B.
15. INSTALLING THE BATTERY
Parts Required:
1 x Battery
(#J)
Installation:
• Unscrew igniter cap from control panel. Insert Battery into battery slot with
positive end (+) facing outward. Screw cap back onto panel.
14A
15
J
14B
10
7
Insert one end of
LP gas cylinder wire retainer
(not flattened)
into the hole for the front support leg and the other end
into the back support leg
12
19
19
Place the upper cooking rack on the
upper ledge inside the main grill.
The cooking rack will lock into
place.
13
1
1
