Plug the indoor siren directly to
Siren
port, no need program any wired siren or wired sensor with
console. It will automatic work with main console
.
Wireless Indoor Siren (option)
Program Indoor Wireless Sirens
If you received a pre-Programed system kit, please ignore this
step and do not program it again
Plug the siren into wall outlet, then press
PROGRAM
key on console. Enter the
default password
888 888
. Use
scroll key
to select
Wireless Sirens
, press
ENTER
, you will see below list.
Add
for add a wireless sensor, highlight
Add
press
Enter
, you will see a default siren
name such as Siren 1, then press Enter You will see"
Put siren in Setting
Mode
". Go to the wireless siren and press the
code
button one time on the
wireless siren, you will see all 4 lights are on. This means the siren is in setting
status waiting for the console to send a signal. Then go back to the console,
press Enter and you will hear two beeps from the console and w
ill see “Add successful”. Then you need
press
Set
button 5 times until all light off to exist the set mode on siren.
DO NOT test it when all 4 LED
lights are on
)
Edit
If you need to edit the siren later, go to Edit under the Wireless Sirens menu, select
the siren’s name and
press Enter. You will then be able to change the siren’s name.
Delete
If you find system shows
“Space full” while you add extra siren or reprogram siren, select "Delete".
Delete all "Siren 1”"Siren 2 “"Siren 3”names, then you are able to re-program your siren by upon instructions
(
you can
’t delete the siren, this only deletes the sirens name. if you want to delete siren from your system,
you need delete it on Siren, detail see how to delete your siren on siren manual page or FAQ
.)
Siren Enable
select "Siren Enable". If you set No, the sirens will not give any alert for the entire system. If you
only want to set an individual zone's siren, you have to go to each zone and Edit. For details, read Edit
Sensor Functions
Duration
You can set wireless sirens to sound on a continuous alert. You can set it from 1 second to a
maximum of 180 seconds.
Arm/DisarmTone
select Arm/Disarm Tone and press Enter,If you set Yes, when you use the remote control to
arm and disarm system, you will hear a loud beep warning from the siren. You can set
No
to turn off this
warning tone if you don’t like it. Default is No.
Encrypt
select Encrypt then press Enter, you will see default 1234 and blink, you can direct input another 4
digits to encrypt your siren
.
BEWARE
If you change encryption code to a new code, you need to re-
program all of your wireless sirens to the console again, you may change it before you program your sirens.
Once you change it, DO NOT change it when you are going to add a second or third siren, otherwise you
will lose the first siren’s program.
Note1: BEWARE if you press and hold the black SET button more than 3 seconds, the siren will deleted
from main console, then you may need to re-program it again
Video:
https://www.youtube.com/watch?v=JcPcwCBLQyc&feature=youtu.be
