PISCO VTA Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 28

PISCO VTA Series Скачать руководство пользователя страница 22

Safety Instructions

Warning

This Safety Instructions aim to prevent personal injury and damage to
properties by requiring proper use of PISCO products.
Be certain to follow ISO 4414 and JIS B 8370.

ISO 4414：Pneumatic fluid power…General rules and safety requirements for system

and their components.

JIS B 8370： General rules and safety requirements for systems and their

components.

This Safety instructions are classified into "Danger", "Warning" and "Caution", depending on

the degree of danger or damages caused by improper use of PISCO products.

Safety Instructions

Danger

Hazardous conditions. It can cause death or

serious personal injury.

Warning

Hazardous conditions depending on usages. Improper Use of

PISCO products can case death or serious personal injury.

Caution

Hazardous conditions depending on usages. Improper use of PISCO

products can cause personal injury or damages to properties.

※

. Safety Instructions are subject to change without notice.

1. Selection of pneumatic products.

① A user who is a pneumatic system designer or has sufficient experience

and technical expertise should select PISCO products.

② Due to wide variety of operating conditions and applications for PISCO

products, carry out the analysis and evaluation on PISCO products. The
pneumatic  system  designer  is  solely  responsible  for  assuring  that  the
user’ s requirements are met and that the application presents no health
or  safety  hazards.  All  designers  are  required  to  fully  understand  the
specifications  of  PISCO  products  and  constitute  all  systems  based  on
the latest catalog or information, considering any malfunction.

2. Usage environment

Do not use PISCO products under the following conditions.
①. Beyond the specifications or conditions stated in the catalog, or the

instructions.

②. Use at outdoors.
③. Excessive vibrations and impacts.
④. Exposure / adhere to corrosive gas, flammable gas, chemicals,

seawater, water and vapor.

Danger

1. Do not use PISCO products for the following applications.

①. Equipment used for maintaining / handling human life and body.
②. Equipment used for moving / transporting human.
③. Equipment specifically used for safety purposes.

«
...
20
21
22
23
24
...
»

Содержание VTA Series





























Отзывы:

Нет отзывов