Piscine Laghetto PLAYA 1, Использование и обслуживание

Страница: 51 / 144

51
PLAYA - USE AND MAINTENANCE
Display current Clock
water temperature display
SETTING PARAMETERS FOR THE GENERAL USER
• Turn off the unit by pressing for 3 seconds the ON-OFF button.
• Wait 1 minute until the arrest of the filtration pump.
• Pressing the LIGHT button for 3 seconds to access to the following parameters:
PARAMETER DESCRIPTION FUNCTION DEFAULT
U0
water temperature
setting ° C
it sets the desired
water temperature
27
°C
U1
hysteresis water
temperature
it sets the hysteresis
of the desired water
temperature
1
°C
U2
duration of ignition
Blower- air massage
it sets the duration in
minutes of air massage
20
min
(maximum value)
U3
timeout duration
ignition light
it sets the length of
light ignition when
it is turned on with
the control unit or
piezoelectric button
00
hours
(set duration)
U4
inhibition time of the
piezoelectric blower
button
it sets the time in
which the piezoelectric
blower button is
inhibited; only after
this time it can be
pressed again
00 sec
U5
inhibition time of the
piezoelectric light
button
Iit sets the time in
which the piezoelectric
button is inhibited
after finishing the
cycle set in U2
parameter; only after
this time can be
pressed again
00
sec