Pirelli ARV3515J-A-GP, Руководство пользователя

Страница: 20 / 142

I
NSTALLATION
2-8
ISP Settings
Please collect the following information from your ISP before setting up
the VoIP Router:
• ISP account user name and password
• Protocol, encapsulation and VPI/VCI circuit numbers
• DNS server address
• IP address, subnet mask and default gateway (for fixed IP users only)
Connect the System
The VoIP Router can be positioned at any convenient location in your
office or home. No special wiring or cooling requirements are needed. You
should, however, comply with the following guidelines:
• Keep the VoIP Router away from any heating devices.
• Do not place the VoIP Router in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the VoIP
Router.
Connect the ADSL Line
Run standard telephone cable from the wall jack providing ADSL service
to the RJ-11 (“ADSL”) port on your VoIP Router. When inserting an
ADSL RJ-11 plug, be sure the tab on the plug clicks into position to ensure
that it is properly seated. If you are using splitterless ADSL service, be sure
you add low-pass filters between the ADSL wall jack and your telephones.
(These filters pass voice signals through but filter data signals out.)