background image

Manual Revision: June 20

Copyright © 2013-2020 Pirate Brand®, All Rights Reserved

16

C-Series Jr - 0.5 / 1.0 

Cu Ft

 User’s Manual

PIRATE BRAND® ABRASIVE BLAST POT EQUIPMENT 5 YEAR / 10 YEAR LIMITED WARRANTY

5 YEAR LIMITED ABRASIVE BLAST POT WARRANTY. 

Manufacturer warrants the complete abrasive blast 

pot it manufactures to be free of defects in material and workmanship for a period of five (5) years from the 

date of invoice. 

10  YEAR  LIMITED  PRESSURE  VESSEL  WARRANTY. 

 Manufacturer warrants the abrasive blast pot 

pressure vessel it manufactures to be free of defects in material and workmanship for a period of ten (10) 

years from the date of invoice.

LIMITATION  OF  WARRANTIES  AND  REMEDIES.  THIS  WARRANTY  IS  EXTENDED  ONLY  TO  THE 

BUYER WHO PURCHASES THE ABRASIVE BLAST POT DIRECTLY FROM THE MANUFACTURER OR 

ITS AUTHORIZED DISTRIBUTORS AND IS NON-TRANSFERABLE.  THE PURCHASER’S EXCLUSIVE 

REMEDY  ARISING  FROM  ITS  PURCHASE  OR  USE  OF  THE  PRODUCT  SHALL  BE  STRICTLY 

LIMITED  TO  THE  REPAIR  OR  REPLACEMENT  OF  THE  PRODUCTS, AT  THE  DISCRETION  OF  THE 

MANUFACTURER, AND ALL WARRANTY CLAIMS OR REQUESTS MUST BE MADE IN WRITING TO THE 

MANUFACTURER WITHIN TEN (10) DAYS AFTER FAILURE OF THE PRODUCT.  ALL OBLIGATIONS OR 

LIABILITIES OF MANUFACTURER OR SELLER FOR DAMAGES ARISING OUT OF OR IN CONNECTION 

WITH THE PRODUCT AND USE OR PERFORMANCE OF THE PRODUCTS, EXCEPT AS EXPRESSLY 

PROVIDED HEREIN, ARE FULLY DISCLAIMED AND EXCLUDED, AND NO SELLER OR DISTRIBUTOR 

HAS ANY AUTHORITY TO MAKE ANY WARRANTY OR ASSUME ANY LIABILITY ON BEHALF OF THE 

MANUFACTURER IN CONNECTION WITH THE SALE OF THE PRODUCT EXCEPT AS STATED HEREIN.

          AS  A  CONDITION  OF  THE  PURCHASE,  PURCHASER  AGREES  THAT  MANUFACTURER  AND 

SELLER  SHALL  NOT,  UNDER  ANY  CIRCUMSTANCES,  BE  LIABLE  FOR  ANY  COST  OF  FREIGHT, 

SHIPPING OR TRANSPORTATION, LABOR, SPECIAL CHARGES, NORMAL MAINTENANCE SERVICES, 

LOST OPERATING TIME, LOSS OF USE, LOST PROFITS, LOSS OF GOODWILL, CONSEQUENTIAL 

DAMAGES, PUNITIVE OR EXEMPLARY DAMAGES, OR OTHER DAMAGES OR LOSS.  OTHER THAN 

AS  DESCRIBED  HEREIN,  MANUFACTURER  AND  SELLER  MAKE  NO  WARRANTY  OF  ANY  KIND, 

EXPRESS  OR  IMPLIED,  WITH  RESPECT  TO  THE  PRODUCTS, AND  SPECIFICALLY  DISCLAIM ANY 

WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTY.  

PURCHASER ASSUMES ALL RISK AND LIABILITY RESULTING FROM THE USE OF THE PRODUCTS.  

PURCHASER FURTHER AGREES AS A CONDITION OF THE SALE AND THE USE OF THE PRODUCT, 

THAT ANY  DAMAGES  OR  RISK  OF  LOSS  OTHER  THAN AS  DESCRIBED  HEREIN ABOVE,  SHALL 

BE THE EXCLUSIVE RESPONSIBILITY OF THE PURCHASER AND NOT THE MANUFACTURER OR 

SELLER.  MANUFACTURER AND SELLER SHALL NOT BE LIABLE FOR ANY DAMAGES INCURRED 

BY ANY PERSON AS A RESULT OF MISUSE, IMPROPER INSTALLATION, IMPROPER APPLICATION, 

IMPROPER  OPERATION  OF  THE  PRODUCTS,  NORMAL  WEAR  AND  TEAR,  ALTERATIONS  OR 

MODIFICATIONS MADE TO THE PRODUCTS, OR ACCIDENT.  THE USE OF REPLACEMENT PARTS 

NOT PROVIDED OR AUTHORIZED BY THE MANUFACTURER VOIDS ALL WARRANTIES.

     A COMPLETELY FILLED OUT WARRANTY CARD MUST BE RETURNED TO THE MANUFACTURER 

WITHIN  THIRTY  (30)  DAYS  OF  PURCHASE  OF  THE  PRODUCT  OR  ALL  WARRANTIES  ARE  VOID.  

PRODUCT MUST BE MAINTAINED IN ACCORDANCE TO THE MAINTENANCE SCHEDULE PROVIDED 

IN  THE  PRODUCT  MANUAL,  FAILURE  TO  MAINTAIN  THE  PRODUCT  IN ACCORDANCE  WITH  THE 

MAINTENANCE  SCHEDULE  VOIDS  ALL  WARRANTIES.    THIS  WARRANTY  DOES  NOT  COVER 

FACTORY INSTALLED OR CUSTOMER INSTALLED ACCESSORIES.

WARRANTY CLAIMS. 

Warranty claims must be submitted to the manufacturer within ten (10) days after 

failure of the product.  Contact information for warranty claims:

Forecast Sales, Inc.

2719 Tobey Dr.

Indianapolis, IN 46219

317-829-0147

Effective July 8, 2015

Warranty

Содержание 121-0510-A-EDC































Отзывы: