PIRASTRO KorfkerRest, Руководство пользователя

Страница: 11 / 36

narrowing the rest
increasing the angle of the hinge joint of the shoulder leg
inwards will narrow the rest and create a stronger clamping
action (see picture 5). in order to adjust the hinge joint,
loosen the torx screw enough to allow the joint to move.
move it to the desired position and tighten the torx screw.
a similar adjustment needs to be made to the chest leg
(see picture 6). to make the rest narrower, slightly loosen
the torx flange screw and rotate the base joint clockwise.
after tightening the torx flange screw, loosen the hinge
joint and swivel the hinge joint inwards. at this point both
adjustment screws need to be parallel with each other and
all screws need to be tightened.
EN 9
5
6