PIRASTRO KorfkerRest, Руководство пользователя

Страница: 10 / 36

adjusting the legs
Each leg has a torx screw connecting the hinge joint with
the base joint and a torx flange screw connecting the
base joint with the wooden bridge. locking rings prevent
movement between the hinge joint and the base joint
and between the base joint and the wood when the torx
screws are tightened correctly. these four locking rings
are essential to the functioning of the rest and should be
replaced if lost or damaged (4 replacements included).
adjustments to the legs should be made in small
increments. after changing their position, look at both
legs sideways and make sure the adjustment screws of the
rubber feet are parallel to each other (see picture 7). When
placed feet downwards on a flat surface, all 4 tips of the
rubber feet should touch the surface. if they are not, adjust
the tilt of the hinge joint of the chest leg.
in order not to change the position of the wooden bridge
in relation to the violin, whatever adjustment is made
needs to be divided between the shoulder leg and the
chest leg. this way the legs will both remain at a similar
angle pointing inward (see picture 4).
after making adjustments always check all screws have
been tightened.
instruction manual
8 EN
4