Page 11 of 14
10 Installation of Accessories
10.1 Round Brush or Bent Spray Nozzle
•
For direct installation onto the
Short Spray Nozzle
, position the
Bent
Spray Nozzle
or the
Round Brush
over the tip of the
Short Spray
Nozzle
, as shown, and push either the
Bent Spray Nozzle
or the
Round Brush
all the way onto the
Short Spray Nozzle
until it is in
position.
•
The Short Spray Nozzle has six sides which means the Bent Spray
Nozzle or the
Round Brush
can be positioned at six different angles
depending on the application.
•
Installing the
Bent Spray Nozzle
or the
Round Brush
to either the
Long Spray Nozzle
or the
Flexible Extension Spray Nozzle
, is the
same procedure.
10.2 Long Spray Nozzle & Flexible Extension Spray Nozzle
•
Hold the outer section of the
Long Spray Nozzle
and push it onto the
Short Spray Nozzle
aligning the arrow on the
Long Spray Nozzle
collar with the single-line marked on the front top of the appliance
body.
•
Push the
Long Spray Nozzle
all the way on then rotate the
Long
Spray Nozzle
in the arrow direction shown on the
Long Spray
Nozzle
collar until the arrow aligns with the double-line marked on the
front side of the appliance body.
•
Installation of the
Flexible Extension Spray Nozzle
is carried out
with the same procedure.
•
To remove the
Long Spray Nozzle
or the
Flexible Extension Spray Nozzle
, reverse the
procedure above.
10.3 Accessory Spray Attachment for Cleaning Windows.
•
First install the
Accessory Spray Attachment
onto the
Short Spray Nozzle
.
•
Take the
Squeegee Plate
and locate the two small hooks into the two suspension lugs on
the back of the
Accessory Spray Attachment
and then swing the
Squeegee Plate
up
and lock the hook over the
Accessory Spray Attachment body
.
•
To remove the
Squeegee Plate
, pull the hook back to release the plate then unhook from
the lugs.