Piranha CNC Plasma Cutting Table, Руководство по эксплуатации

Страница: 54 / 176

OPERATIONS
Sept-2018
54
6. ADJUSTING SPEEDS
Types of speeds:
•
RAPID SPEED
– this is the speed that the machine uses when traversing
between cuts (going from the end of one cut to the beginning of the next)
•
CUTTING SPEED
– this is the speed at which the machine moves when the
plasma torch is cutting
(refer to the plasma system manufacturer’s cut charts
for cutting speed information)
•
JOG SPEED
– this is the speed at which the machine moves when manually
moving the machine with the arrow keys
In the MANUAL menu, when H-SPED is selected, the button is highlighted with a
dark blue background, and the RAPID SPEED can be adjusted as a percentage of
the MAXIMUM TRAVERSE SPEED using the F+ / F- buttons.
When H-SPED is not selected, the button is no longer highlighted and the cutting
speed can be adjusted as a percentage of the active cutting speed using the F+ / F-
buttons.
When H-SPED is selected, the JOG SPEED is the same as the RAPID SPEED.
When H-SPED is not selected, JOG SPEED is the same as CUTTING SPEED.