Pioneer XV-DV575, Руководство по обслуживанию

Страница: 6 / 102

6
XV-DV575
1 2 3 4
A
B
C
D
E
F
1 2 3 4
1.3 WHEN REPLACING DVD MECHA ASSY
1.4 DISC REMOVAL METHOD AT NO POWER SUPPLY
Fig. 1
Short circuit using a
soldering iron.
Pickup PCB
[ Removing the DVD MECHA Assy ]
Before removing Pickup PCB and DVD PCB connector, short circuit the position shown in Fig. 1 usinga soldering iron.
If you remove the DVD MECHA Assy with no soldering, the Laser may be damaged.
[ Installing the DVD MECHA Assy ]
Remove all the soldering on the short circuit position after the connection of Pickup PCB and DVD PCB connector.
NOTE
• Be sure to use lead-free solder and a soldering iron.
• When Soldering/Removing of solder, use the draw in equipment over the Pickup Unit to prevent the Flux smoke from it.
Fig. 1
1. Slide the Rack Loading (White) toward the arrow direction by using a minus driver to release the lock.
(Refer to Fig. 1)
2. Manually open the Tray.
NOTE:
Please strongly pushing Rack Loading (White) to release the lock because the tray doesn't go out easily.
Tray open
Minus screwdriver
Bottom view
Rack Loading (White)