Pioneer XC-IS21MD Скачать руководство пользователя

Страница: 84 / 98

XC-IS21MD

Error Display

? DISC

UTOCER W

FOCUS ERR

MEM. FULL

BLANK DISC

DEFECT

UTOCER W

EEPROM ER

MECH ER 3E
3M
3L
3D
2E
2M
2L
2D
1E
1M
1L
1D

SIO ERROR

Details of Error

TOC read was incorrect or could not be read properly.

Fault occurred during rewriting of UTOC rewriting, and rewriting
could not be performed correctly.

Inserted a disc but could not bring in FOCUS.

The DRAM has become filled with music data, but they can not
be written (to the disc).

After reading UTOC, total number of TNO and NAME characters
was 0.

Focus execution error, etc. occurred due to shock during REC-
PLAY.

UTOC read was correct but could not be rewrite it.

The EEPROM data are incorrect.

Never completes EJECT.

Never moves HEAD UP.

Never moves HEAD DOWN.

The set microcomputer and MD mechanism microcomputer
are not communicating properly.

It can't communicate with system control IC and MD mechanism
control IC.

Measure

The TOC data recorded on the disc do not comply with
MD Standards, so try using another disc.

The disc may be scratched or damaged, so try using
another disc.

Scratch on disc. Replaced with other discs.

Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.

Record and check if disc is recordable.

Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.

Check to see if the recording head contact is correct or if
there are any disconnections between the board and the
recording head.

Try doing a Preliminary Adjustment and a normal
Adjustment. If the problem still persists, replace the
EEPROM.

Check if communication line with the MD mechanism
assy and connector is normal.

Содержание XC-IS21MD



































































































Результаты поиска

Содержание XC-IS21MD

Отзывы:

Похожие инструкции для XC-IS21MD

Бренды по названию

Популярные бренды

Pioneer XC-IS21MD, Руководство по обслуживанию

Результаты поиска

Содержание XC-IS21MD

Отзывы:

Похожие инструкции для XC-IS21MD

Бренды по названию

Популярные бренды