11
11
35
Additional information
3
Press Bookmark icon. Click Bonjour list (a), and then
select this receiver's name (Friendly Name) (b) in
Bookmark.
If Bonjour list is not displayed, access the IP address
“http://(the receiver's IP address)” from Safari.
If you use X-HM71 or X-HM81, XC-HM71 or XC-HM81 is
displayed as the receiver's name.
Note
•
Confirm the receiver's IP address as follows:
1. Press
NETWORK
SETUP
.
2. Select System Info.
3. Confirm the IP field.
4
Click
Firmware Update
.
5
Press
Start
.
The firmware update prepare screen is displayed. If the
screen does not switch automatically, click
Click here
.
6
Browse the latest firmware on your computer (a) and
then press Upload (b).
The confirmation screen is displayed. If you continue the
firmware update, press
Yes
. Once the firmware update
process starts, you can't stop it. Wait until the file is
uploaded (about one minute may be required depending
on your LAN connection environment).
7
The firmware upload status screen is displayed. Press
Ok
.
“The upload process finished successfully.” will be shown
when the update is completed.
Unplug the the power cord from the AC outlet after the
update is completed.
Note
•
This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.
Resetting this receiver
Use this procedure to reset all receiver settings to the factory
default.
Important
•
Disconnect all components connected to this receiver
before the operation.
1
Press
NETWORK
SETUP
.
The
Initial Setup
screen is displayed on the display.
2
Use
/
to select
Factory Reset
.
3
Select
Start
.
“Reset?” screen appears. Press
ENTER
to reset the
system.
All the settings will be reset to the factory default next
time the receiver is turned on.
a
b
s1000
1.11
b
a
S1000
BCO_1000.fw
11
BCO_1000.fw
