manualshive.com logo in svg

Pioneer WYT Inverter Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Pioneer WYT Inverter Series Скачать руководство пользователя страница 31

Mounting the Outdoor Unit to the Selected Location

The outdoor unit should be installed either on a pad or on a solid wall and fastened securely. 

Follow the procedure below before connecting any pipes or cables:

• Decide what the best position on the wall or on the ground is, and leave enough space to be

   able to carry out maintenance easily. Anchoring dimensions are provided on 

Page 42

.

• If wall mounting, fasten the support brackets to the wall using hardware that is particularly 

   suited for the type of wall. Use the appropriate amount of hardware for the application.

• The unit must be installed following all national regulations.

Outdoor Unit Condensate Water Drainage

The condensate water and the ice formed in the outdoor unit during heat mode can be

directed away using the optional drain line included with the system.

1. Fasten the drain port in the 1-inch port located

     in the part of the unit depicted in the diagram.

2. Connect the drain port and the drain line.

3. Ensure the condensate will drain to a suitable place.

 Page 31 

7

Outdoor Unit Installation Instructions

Outdoor Unit

Installation  

Drain Line

Drain Port

Содержание WYT Inverter Series















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды